Cost to Drill a Well in Florida
Water wells in Florida average about 142 feet deep across the 1,062,881 water-well records in our database. At typical U.S. drilling rates, that puts the drilling and casing at roughly $3,800 to $5,700, before the pump, tank, treatment, and permits that complete a working system. Here is how the numbers break down, and the real Florida data behind them.
- Avg depth
- 142 ft
- Water wells
- 1,062,881
- U.S. $/ft
- $21-42
Typical U.S. well drilling rates by depth
These are national average residential rates for the drilling and casing, not Florida-specific prices. Rates fall into depth bands, with a setup (mobilization) fee on top. Use them as a yardstick, then get local quotes.
| Well depth | Drilling + casing (per ft) | Setup fee |
|---|---|---|
| Up to 100 ft | $28 - $42 | $400 - $600 |
| 101-300 ft | $24 - $36 | $400 - $600 |
| 301-600 ft | $25 - $30 | $750 - $800 |
| 601 ft and deeper | $21 | $1,000 |
National residential rate model, drilling and casing only. Higher per-foot rates apply to larger casing and hard-rock drilling. Pump, pressure tank, treatment, and permits are separate (see below).
What Florida well records actually show
Cost follows depth, so the most useful Florida number we have is the real one: our database holds 1,062,881 water-well records across Florida, with completed wells averaging about 142 feet deep. The typical static water level - how far down the water table sits - runs about 31 feet across 861,514 recorded readings. These are real construction records you can review before you hire.
1,062,881
142 ft
~31 ft
What that means for a typical Florida well
Illustrative drilling + casing at 142 ft
$3,800 - $5,700
This applies the national residential rate ($24 to $36 per foot at this depth) to Florida's real average well depth of 142 feet. It is an illustration built from a national rate card and Florida's recorded average depth - not a quote, and not a price observed in Florida. Your actual cost depends on your site's depth, geology, and casing, plus the pump, tank, treatment, and permits covered below.
One more thing quotes can't promise: depth. Nobody knows exactly how deep the water is until the drill finds it, so drillers quote a per-foot rate against an estimated depth - and if your well has to go deeper to reach a reliable aquifer, the extra footage bills at that same rate. That is normal practice, not a sign of a dishonest driller. Budget a 15-25% depth contingency above any estimate, and plan for the deeper half of your local range rather than the shallowest case.
Beyond the hole: the complete water system
The drilled hole and casing are only part of the bill. A working well also needs a pump and pressure tank, wiring and a pitless adapter, a sanitary cap and grouting, water testing, and often treatment for hardness, iron, or bacteria. Add it up and a complete private well system commonly runs $2,500-$10,000+ for Florida, based on our state cost research, versus $5,000-$15,000 nationwide. The low end is a shallow well with simple equipment; the high end is a deep well with treatment and difficult access. A typical Florida project takes 6-12 weeks from planning to usable water.
What drives the cost of a well in Florida
Depth
The biggest lever. Florida wells average about 142 feet, but deeper aquifers mean more feet at the per-foot rate.
Geology and casing
Hard rock drills slower and can push per-foot rates toward the high end. Loose or caving formations need more casing, which adds material cost.
Water table and yield
The water table around Florida sits near 31 feet in our records, but wells are drilled well past it to reach a dependable, year-round supply.
Pump, tank, and treatment
The pump, pressure tank, and any treatment for hardness, iron, or bacteria are a large share of a complete system - often several thousand dollars.
Permits and testing
Florida: WMD permit required. Permit, inspection, and water-test fees are usually modest but affect the timeline.
Site access
A rig needs room to work. Tight lots, long driveways, steep grade, or remote sites raise mobilization and labor.
Well drilling cost FAQ for Florida
More Florida well resources
Florida Well Drillers
Browse licensed, insured drilling and pump contractors serving Florida and request quotes.
Find drillersWater Table Depth
Free tool: enter any Florida address to see the likely water table and typical well depth from real nearby wells.
Look up depthFlorida Well Owner Guide
Costs, permits, timeline, water quality, and maintenance for private wells in Florida.
Open guideCost to Drill a Well
The national picture: what a private well costs, what drives the price, and how to budget.
Read the guideWell drilling cost in neighboring states
Get a real Florida well quote
National rates get you in the ballpark. For a firm number, check your address depth and get written quotes from licensed Florida drillers.
Cost figures on this page are national averages from DrillerDB's rate model paired with real Florida well-depth records. They are estimates for planning, not quotes. Depth quotes are per-foot estimates, and actual drilling can run past the quoted depth, so budget 15 to 25 percent of leeway and ask your driller how overage is billed. Always confirm with a licensed local driller before you budget a project.